Use this guide to turn on your Low Voltage LG RESU Battery
A low voltage battery will look one of the following:
You will need a 6mm Allan key tool before beginning.
- Remove the top cover by un screwing the 4 hex screw heads in each of the four corners
- There is a circuit breaker located under the cover.
- Push the switch all the way to the right (OFF)
- Push the switch all the way to the left (ON)
- A blue light should now illuminate on the front of the battery. This means the battery is now turned on.
If the battery trips again, please contact SkyEnergy as this could mean a potential problem in the system.
Comments
0 comments
Please sign in to leave a comment.