I can't see the additonal solar on the screen

Prerequisites

1. Both the SkyBox and the solar inverter need to be on the same Wi-Fi
2. If SMA - the following settings need to be configured
   1. Device Parameters
   2. External Communication
   3. TCP - Activate
   4. UDP - Activate
3. If Fronius, nothing is required.

If all of the above is complete, on the SkyBox screen, check:

1. Settings
2. PV Inverters
3. Scan > Wait until 100%
4. Inverters > Your inverter should show up on the screen, if the system is off-grid, change the Position to ACOUT