General FAQ

My inverter is getting hot and overloading

Victron inverters will "de-rate" under high temperature until the point they are so hot they will go into an overload alarm, this i caused by two main reasons.

1. The Victron is overloading, check the loads against the continuous output ratings below for common inverters in Skyboxes
   1. 5kVA - 4000w
   2. 8kVa - 6400w
   3. 10kVa - 8000w
   4. 15kVa - 12000w
2. The inverter is in a hot environment. The higher the ambient temperature, the less load it will be able to output, consider reducing loads at high temperature times.